Posted inFeatured
Posted inAdvanced Design of Stee Structures
STEEL BEAMS WITH WEB OPENINGS
The responsibility of a Structural Engineer lies in not merely designing the structure based on…
Posted inAdvanced Design of Stee Structures
DIFFERENCES BETWEEN POST AND BEAM AND RIGID FRAME
Post and Beam: When a vertical load weighs on a common post and beam structure, it…
Posted inAdvanced Design of Stee Structures
WHAT IS A RIGID FRAME BUILDING?
The structure of a steel rigid frame building is characterized by its rigid connections of…
Posted inAdvanced Design of Stee Structures
Buckling length in sway and non-sway structures
One of the few difficult things about buckling lengths is, that you need to know…
Posted inAdvanced Design of Stee Structures
Strength of Beam-Column Segments
INTRODUCTION In the following two chapters the strength and behavior of beam-column segments subjected to compression combined with biaxial…
Posted inAdvanced Design of Stee Structures
Biaxial bending
A column is a vertical structural member designed to transfer a compressive load. For example, a column might transfer loads from a ceiling, floor or roof slab or from a beam,…
Posted inAdvanced Design of Stee Structures
What is an Axial Force?
Axial force is the compression or tension force acting in a member. If the axial force acts through the…
Posted inAdvanced Design of Stee Structures
Difference Between Short Column and Long Column
Sr.No.Long ColumnShort Column1This column is considered to be long if the ratio of effective length…
Posted inAdvanced Design of Stee Structures
Slenderness Ratio
lenderness ratio of column is basically defined as the ratio of effective length of the column…
Posted inAdvanced Design of Stee Structures
Shapes of Cross-Section
• Square • Rectangular • Circular • Pentagonal • Hexagonal • Octagonal • T-Shape or L-Shape etc. Material of Construction • Timber Column • Masonry Column • R.C.C Column…