Posted inFeatured
Posted inAdvanced Design of Stee Structures
Difference Between Short Column and Long Column
Sr.No.Long ColumnShort Column1This column is considered to be long if the ratio of effective length…
Posted inAdvanced Design of Stee Structures
Slenderness Ratio
lenderness ratio of column is basically defined as the ratio of effective length of the column…
Posted inAdvanced Design of Stee Structures
Shapes of Cross-Section
• Square • Rectangular • Circular • Pentagonal • Hexagonal • Octagonal • T-Shape or L-Shape etc. Material of Construction • Timber Column • Masonry Column • R.C.C Column…
Posted inAdvanced Design of Stee Structures
What Is Column?
• A compression member, i.e., column, is an important element of every reinforced concrete structure. These are used to transfer a…
Posted inAdvanced Design of Stee Structures
Long-span beam
Design of long span beams The use of long span beams results in a range…
Posted inAdvanced Design of Stee Structures
Short beam reinforcement
Beams with short span lengths compared to the span length of the other beams that…
Posted inAdvanced Design of Stee Structures
What is Shear center?
Shear Center is a point through which if the external load passes, then there will not…
Posted inAdvanced Design of Stee Structures
Continuous Beams
The statically indeterminate multi span beam supported on hinges is known as continuous beam. These…
Posted inAdvanced Design of Stee Structures
What is the cantilever beam?
Cantilever beam can be defined as a beam which is supported on only one end.…