Posted inFeatured
Posted inAdvanced Concepts
STEEL DESIGN: TYPES OF ELEMENTS
IS 800:2007 classifies elements in to three types, as per Cl. 3.7.3., as follows. 1.…
Posted inAdvanced Concepts
CLASSIFICATION OF CROSS-SECTIONS
Plate elements of a cross-section may buckle locally due to compressive stresses. The local buckling…
Posted inAdvanced Concepts
PROPERTIES OF STRUCTURAL STEEL
1. Physical properties Physical properties of structural steel, as detailed by cl.2.2.4.1 of IS 800:2007,…
Posted inAdvanced Concepts
Collapse Mechanism
So for our previous beam, we know that we require two hinges for collapse (one…
Posted inAdvanced Concepts
Shape Factor
Thus the ratio of elastic to plastic moment capacity is: This ratio is termed the shape…
Posted inAdvanced Concepts
Statically indeterminate axial problems
In these analyses we used superposition often, knowing that for a linearly elastic structure it…
Posted inAdvanced Concepts
Plastic Analysis of Steel Structures
Introduction to Plastic Analysis: Analysis of stress, deflection and distortion determinations within the limit of…
Posted inAdvanced Concepts
Triangular Elements
Shape function using Cartesiancoordinates Higher Order Triangular Elements Higher order elements are useful if the…
Posted inAdvanced Concepts
Plane Stress and Plane Strain
Plane Stress Analysis Fig. 1 shows the important facts about plane stress analysis. The structural…
Posted inAdvanced Concepts
Plastic analysis
In plastic analysis and design of a structure, the ultimate load of the structure as…