Posted inFeatured
Posted inAdvanced Design of Stee Structures
STEEL DESIGN: TYPES OF ELEMENTS
IS 800:2007 classifies elements in to three types, as per Cl. 3.7.3., as follows. 1.…
Posted inAdvanced Design of Stee Structures
Design Of Steel: Classification Of Cross-Sections
Plate elements of a cross-section may buckle locally due to compressive stresses. The local buckling…
Posted inAdvanced Design of Stee Structures
Steel Design: Geometrical Properties
The geometrical properties, as detailed in Cl. 3.6 of IS 800:2007, of the gross and…
Posted inAdvanced Design of Stee Structures
Steel Design: Loads And Forces
Clause 3.2 of IS 800:2007 specifies the various loads and forces that has to be…
Posted inAdvanced Design of Stee Structures
General Steel Design Requirements: Basis For Design
The general design requirements are outlined in Section 3 of IS 800:2007. BASIS FOR DESIGN…
Posted inAdvanced Design of Stee Structures
Rolled Steel Sections
Hot Rolling is usually used to produce the standard section. In this process, the molten…
Posted inAdvanced Design of Stee Structures
Properties Of Structural Steel
The properties of structural steel, as per clause 2.2.4 of IS 800:2007, for use in…
Posted inAdvanced Design of Stee Structures
Louver
A louver or louvre is a window blind or shutter with horizontal slats that are angled to admit light and air, but to keep out…
Posted inAdvanced Design of Stee Structures
Work of External Forces
Whenever a force is displaced by a certain amount or a displacement is induced by…